User's Manual
100
5.4.3 Configuring PTZ Functions
5.4.3.1 Configuring Presets
Procedure
Step 1 On the expanded PTZ control panel, click .
Figure 5-55 Preset
Step 2 Click the direction arrows to the required position.
Step 3 In the
Preset
box, enter the value to represent the required position.
Step 4 Click
Setting
to complete the preset settings.
5.4.3.2 Configuring Tours
Procedure
Step 1 On the expanded PTZ control panel, click .
Step 2 Click the
Tour
tab.
To Next Page
Loading...
