User's Manual
62
Parameter Description
MTU
In the
MTU
box, enter a value for network card. The value ranges
from 1280 byte through 1500 byte. The default is 1500.
The suggested MTU values are as below.
●
1500: The biggest value of Ethernet information package. This
value is typically selected if there is no PPPoE or VPN
connection, and it is also the default value of some routers,
network adapters and switches.
●
1492: Optimized value for PPPoE.
●
1468: Optimized value for DHCP.
●
1450: Optimized value for VPN.
Test
Click
Test
to test if the entered IP address and gateway are
interworking.
5.1.4.5 Configuring P2P Settings
You can add the Device into your phone client or the platform to manage.
You can also configure P2P function by selecting
Main Menu
>
Network
>
P2P
.
Make sure the DVR is connected into the Internet, and if yes, in the
Status
box of the P2P page, it
shows
Online
.
Procedure
Step 1 After you have configured the network settings, on the
Network
page, click
Next
.
Figure 5-21 P2P
Step 2 Enable the P2P function.
After the P2P function is enabled and connected to the Internet, the system will collect
your information for remote access, and the information includes but not limited to email