Dahua Technology DH-XVR1B08-I User Manual

User's Manual
181
Parameter Description
Picture Storage
Select the
Picture Storage
checkbox to take a snapshot of the selected
channel.
To use this function, make sure the snapshot function is enabled for
Intel
in
Main Menu
>
STORAGE
>
Schedule
>
Snapshot
.
Video Matrix
Select the checkbox to enable the function. When an alarm event
occurs, the video output port outputs the settings configured in
Main
Menu
>
DISPLAY
>
TOUR
>
Extra Screen
.
●
This function is available on select models.
●
The extra screen must be enabled to support this function.
Buzzer Select the checkbox to activate a buzzer noise at the Device.
Log Select the checkbox to enable the Device to record a local alarm log.
Alarm Tone Select to enable audio broadcast in response to a face detection event.
Warning Light Select the checkbox to enable the warning light alarm of the camera.
Siren Select the checkbox to enable the sound alarm of the camera.
Smart Illumination Select the checkbox to enable the smart illumination of the camera.
Step 6 Click
Apply
to complete the settings.
5.11.2.1.2 Searching for and Playing Detected Faces
You can search the detected faces and play back.
Procedure
Step 1 Select
Main Menu
>
AI
>
AI Search
>
Face Detection
.
Figure 5-133 Face detection
Step 2 Select the channel, enter the start time and end time, and set for the gender, age, glasses,

Dahua Technology DH-XVR1B08-I Specifications

General

Brand	Dahua Technology
Model	DH-XVR1B08-I
Category	DVR
Language	English