User's Manual
226
enable an AI function.
●
Define the period by editing.
1. Click .
Figure 5-188 Period
2. Configure the time range for each period and then select the AI function to be
effective during each period.
You can select
All
to apply the settings to all the days in the week, or select specific
days that you want to apply the settings to.
3. Click
OK
.
Step 5 Click
Apply
.
5.12 IoT Function
5.12.1 Configuring Sensor Settings
You can connect external sensors wirelessly through the Device with USB gateway or through
connecting to a camera gateway. After connection, you can activate alarm events through external
sensors.
5.12.1.1 Connecting Sensor through Device
Only the Device with USB gateway supports this function.
Procedure
Step 1 Select
Main Menu > IoT > Management > Sensor Pairing
.
To Next Page
Loading...
Need help?
General
