User's Manual
117
●
Analog Channel: Select the transmission medium such as CVI, AHD, CVBS, and then
follow the onscreen instructions to complete the settings.
●
IP Channel: You can enable the IP channels by disabling the corresponding analog
channels. The Device also provides expanded IP channels for your use, such as the
17–
64
channels in 0.
●
The 17–64 channels are only for IP camera and the range changes dependent on the
model you purchased.
●
The channel selection for analog camera or IP camera are in sequence, for example, if
you want to select channels for IP camera, you need to select from the last channel
number Channel
16
first, which means, you cannot go to select the channel
15
directly
until you have selected the channel
16
.
Step 3 Click
Apply
and follow the onscreen instructions to complete the settings.
5.5.8 Upgrading Coaxial Camera
Procedure
Step 1 Select
Main Menu
>
CAMERA
>
HDVCI Update
.
Figure 5-71 Update
Step 2 Click
Browse
.
Step 3 Select the upgrade file and then click
OK
.