User's Manual
128
Parameter Description
Remote CH No.
Enter the remote channel number of the remote device that you want to
add.
Decoder Strategy In the
Decoder
Strategy list, select
Default
,
Realtime
, or
Fluent
.
Protocol Type
●
If the remote device is added through private protocol, the default
type is
TCP
.
●
If the remote device is added through ONVIF protocol, the system
supports
Auto
,
TCP
,
UDP
, or
MULTICAST
.
●
If the remote device is added through other manufacturers, the
system supports
TCP
and
UDP
.
Encryption
If the remote device is added through ONVIF protocol, enabling the
Encryption
checkbox will provide encryption protection to the data being
transmitted.
To use this function, the HTTPS function should be enabled for the
remote IP camera.
Step 3 Click
OK
to save the settings.
●
Only one device can be added manually at one time.
●
indicates successful connection and indicates connection failed.
5.6.1.4 Modifying or Deleting Remote Devices
You can modify and delete the added devices.
●
Modify the remote devices
1. Click or double-click a device.