User's Manual
312
Table 5-80 Illegal login parameters
Parameter Description
Alarm-out Port
The alarm device (such as lights, sirens) is connected to the alarm
output port. When an alarm occurs, the device transmits the
alarm information to the alarm device.
Post-Alarm
When the alarm ends, the alarm extended for a period of time.
The time range is from 0 seconds through 300 seconds.
Buzzer Select the checkbox to activate the buzzer when an alarm occurs.
Alarm Tone
Check the box and then select the corresponding audio file from
the dropdown list. System plays the audio file when the alarm
occurs.
Log
Select the checkbox, the device records the alarm information in
the log when an alarm occurs.
Send Email
Select the checkbox. When an alarm occurs, the device sends an
email to the set mailbox to notify the user.
To use this function, make sure the email function is enabled in
Main Menu
>
NETWORK
>
Email
.
Step 3 Click
Apply
.
5.20 Configuring System Settings
5.20.1 Configuring General System Settings
You can configure the device basic settings, time settings, and holiday settings.
Procedure
Step 1 Select
Main Menu
>
SYSTEM
>
General
>
Holiday
.
To Next Page
Loading...
Need help?
General
