User's Manual
59
Parameter Description
Mouse Pointer Speed
Adjust the speed of double-click by moving the slider.
The bigger the value is, the faster the double-clicking speed must
be.
5.1.4.3 Configuring Date and Time Settings
You can configure the system time, choose the time zone, set the daylight saving time, and enable
the NTP server.
You can also configure date and time settings by selecting
Main Menu
>
SYSTEM
>
General
>
Date
&Time
.
Procedure
Step 1 After you have configured the general settings, on the
General
page, click
Next
.
Figure 5-19 Date&Time
Step 2 Configure the settings for date and time parameters.
Table 5-4 Date and time parameters
Parameter Description
System Time
In the
System Time
box, enter time for the system.
Click the time zone list, you can select a time zone for the
system, and the time in adjust automatically.
Do not change the system time randomly; otherwise the
recorded video cannot be searched. It is recommended to
avoid the recoding period or stop recording first before you
change the system time.
Time Zone In the
Time Zone
list, select a time zone for the system.
Date Format
In the
Date Format
list, select a date format for the system.