User's Manual
144
No. Function Description
8
View Layout and
Channel Selection
●
In the
Camera Name
list, select the channel(s) that you
want to play back.
●
The window split is decided by how you select the
channel(s). For example, if you select one channel, the
playback is displayed in the single-channel view; if you
select two to four channels, the playback is displayed in
the four-channel view. The maximum is eight channels.
●
Click to switch the streams. indicates main
stream, and indicates sub stream.
9 Video Splice Splice a section of recorded video and save it.
10 Backup Back up the recorded video files.
11 List Display
This area includes
Tag List
and
File List
.
●
: Click the
Tag List
button, the marked recorded
video list is displayed. Double-click the file to start
playing.
●
: Click the
File List
button, the searched recorded
video list is displayed. You can lock the files.
12 Full Screen
Click to display in full screen. In the full screen mode,
point to the bottom of the screen, the time bar is displayed.
Right-click on the screen to exit full screen mode.
13 Time Bar Unit
You can select 24 hr, 2 hr, 1 hr, or 30 min as the unit of time
bar. The time bar display changes with the setting.
5.9.3.1 Introducing Playback Controls Bar
You can perform the operations such as control the speed of playback, add mark, and take snapshots
through the playback controls bar.
Figure 5-98 Playback control bar
The play backward function and playback speed are dependent on the product version. The actual
product shall govern. You can also contact the technical support to consult the hardware version
information.
Table 5-34 Playback control bar description
Icon Function
,
Play/Pause.
During playing back, you can switch between play and pause.
Stop.
During playing back, you can click the
Stop
button to stop playback.
To Next Page
Loading...
Need help?
General
