User's Manual
60
Parameter Description
Date Separator
In the
Date Separator
list, select a separator style for the
date.
Time Format
In the
Time Format
list, select
12-HOUR
or
24-HOUR
for the
time display style.
DST
Enable the Daylight Saving Time function. Click
Week
or click
Date
.
Start Time
Configure the start time and end time for the DST.
End Time
NTP
Enable the NTP function to sync the Device time with the
NTP server.
If NTP is enabled, device time will be automatically
synchronized with server.
Serve Address
In the
Server Address
box, enter the IP address or domain
name of the corresponding NTP server.
Click
Manual Update
, the Device starts syncing with the
server immediately.
Port
The system supports TCP protocol only and the default
setting is 123.
Interval
In the
Interval
box, enter the amount of time that you want
the Device to sync time with the NTP server. The value
ranges from 0 to 65535.
5.1.4.4 Configuring Network Settings
You can configure the basic network settings such as net mode, IP version, and IP address of the
Device.
You can also configure network settings by selecting
Main Menu
>
NETWORK
>
TCP/IP
.
Procedure
Step 1 After you have configured the date and time settings, on the
Date &Time
page, click
Next
.
To Next Page
Loading...
Need help?
General
