Dahua Technology DH-XVR1B08-I User Manual

User's Manual
269
Parameter Description
Server Address
The IP address and communication port of the PC installed
with alarm client.
Port
Auto Report Plan
In the Auto Report Plan list, select time cycle and specific time
for uploading alarm.
Step 3 Click
Apply
to complete the settings.
5.15.1.13 Configuring P2P Settings
You can manage the devices by using P2P technology to download the application and register the
devices. For details, see "5.1.4.5 Configuring P2P Settings".
5.15.2 Configuring Network Testing Settings
5.15.2.1 Testing the Network
You can test the network connection status between the Device and other devices.
Procedure
Step 1 Select
Main Menu
>
MAINTAIN
>
Network
>
Test
.
Figure 5-232 Network test
Step 2 In the
Destination IP
box, enter the IP address.
Step 3 Click
Test
.
After testing is completed, the test result is displayed. You can check the evaluation for
average delay, packet loss, and network status.

Dahua Technology DH-XVR1B08-I Specifications

General

Brand	Dahua Technology
Model	DH-XVR1B08-I
Category	DVR
Language	English