User's Manual
316
Figure 5-292 Maintenance
Step 2 Configure the settings for the system maintenance parameters.
Table 5-82 Maintenance parameters
Parameter Description
Auto Reboot In the
Auto Reboot
list, select the reboot time.
Case Fan Mode
In the
Case Fan Mode
list, you can select
Always
or
Auto
. If you select
Auto
, the case fan will stop or start according to the external conditions
such as the Device temperature.
This function is available on select models, and it is only supported on the
local configuration page.
Step 3 Click
Apply
to complete the settings.
5.20.4 Exporting and Importing System Settings
You can export or import the Device system settings if there are several Devices that require the
same setup.
●
The
IMP/EXP
page cannot be opened if the backup operation is ongoing on the other pages.
●
When you open the
IMP/EXP
page, the system refreshes the devices and sets the current
directory as the first root directory.
●
Click
Format
to format the USB storage device.
Exporting System Settings
To Next Page
Loading...
Need help?
General
