User's Manual
211
Table 5-47 Intrusion parameters
Parameter Description
Name Enter the customized rule name.
Sensitivity
Configure the detection sensitivity.
The higher the value, the easier to trigger an alarm but
meanwhile the higher false alarm rate.
Action Set the intrusion action, including appear and crossing area.
Direction
Set the intrusion direction. You can select
Enter
,
Exit
, and
Both
.
Target Filter
Click and then select effective target. With
Human
and
Motor Vehicle
selected by default, the system
automatically identifies the person and motor vehicle
appeared within the monitoring range.
Effective Target
4) Drag to draw an area.
5) Click
OK
to save the settings.
Step 3 Click to set the actions to be triggered.
Step 4 Select the
Enable
checkbox, and then click
Apply
.
The intrusion detecting function is active. When the target enters and leaves the area, or
the target appears in the defined area, the system activates alarms.
5.11.2.3.4 Smart Search for IVS Function
You can search for the intelligent events and play back.
Procedure
Step 1 Select
Main Menu
>
AI
>
AI Search
>
IVS
.
Figure 5-170 IVS
Step 2 In the
Channel
list, select the channel that you want to search for the events, and then set
other parameters such as start time, end time, event type, and alarm object.
Step 3 Click
Smart Search
.
The results that satisfy the searching conditions are displayed.
To Next Page
Loading...
Need help?
General
