User's Manual
186
Step 4 Enter the face database name, and then click
OK
.
●
Click to modify database name.
●
Click to view the database details and add new faces to the database.
●
Select the database, and then click
Modeling
. The system will extract the attributes of
face pictures in the database for the future comparison.
●
Select the database, and then click
Delete
to delete the database.
Figure 5-139 Configure database
5.11.2.2.2 Adding Face Pictures
You can add face pictures to the existing databases one by one or by batch, or add from the
detected faces.
To add face pictures one by one or by batch, you need to get the pictures from the USB storage
device. The picture size should be smaller than 256K with resolution between 200 × 200–6000 ×
5000.
Adding One Face Picture
1. Select
Main Menu
>
AI
>
Database
>
Face Database Config
.
To Next Page
Loading...
Need help?
General
