User's Manual
261
5.15.1.7 Configuring Email Settings
You can configure the email settings to enable the system to send the email as a notification when
there is an alarm event occurs.
Procedure
Step 1 Select
Main Menu
>
NETWORK
>
Email
.
Figure 5-225 Email
Step 2 Configure the settings for the email parameters.
Table 5-60 Email parameters
Parameter Description
Enable
Enable the email function.
There might be risk of sending data to specified email address after it is
enabled.
SMTP Server Enter the address of SMTP server of sender’s email account.
Port
Enter the port value of SMTP server. The default value setting is 25. You can
enter the value according to your actual situation.
Username
Enter the username and password of sender’s email account.
Password
Anonymous If enable the anonymity function, you can login as anonymity.
Receiver
In the
Receiver
list, select the number of receiver that you want to receive
the notification. The Device supports up to three mail receivers.
Email Address Enter the email address of mail receiver(s).
Sender
Enter the sender’s email address. It supports maximum three senders
separated by comma.