User's Manual
170
Figure 5-123 Detection setting
Step 3 Configure the regions settings. You can configure totally four regions.
1. Select one region, for example, click .
2. Drag on the screen to select the region that you want to detect.
The selected area shows the color that represents the region.
3. Configure the parameters.
Table 5-40 Detection region setting
Parameter Description
Name Enter a name for the region.
Sensitivity
Every region of every channel has an individual sensitivity value.
The bigger the value is, the easier the alarms can be activated.
Threshold
Adjust the threshold for motion detect. Every region of every
channel has an individual threshold.
When anyone of the four regions activates motion detect alarm, the channel where this
region belongs to will activate motion detect alarm.
Step 4 Right-click on the screen to exit the region setting page.
Step 5 On the
Motion Detection
page, click
Apply
to complete the settings.
5.10.4.1.2 Setting Motion Detection Period
The system only activates the alarm in the defined period.
Procedure
Step 1 Next to
Schedule
, click
Setting
.