User's Manual
165
Figure 5-119 Siren
Step 2 Configure the settings for the siren parameters.
Table 5-38 Siren parameters
Parameter Description
Channel
In the
Channel
list, select a channel that is connected to a camera that
supports audio function.
Play
Click
Play
to manually trigger the IP camera to play audio file.
Delay
Set a length of time for the Device to delay turning off alarm after the
alarm is cancelled. The value ranges from 5 seconds to 30 seconds, and
the default value is 5 seconds.
Audio Clip
Select the audio clip for the siren sound. The default setting is
Clip 1
.
Volume
Select the volume for the audio clip. You can select the flash frequency
from
Low
,
Middle
, and
High
.
Update Audio Clip
Import the upgrade audio file (.bin or .wav) to upgrade the alarm audio
file of the camera.
Step 3 Click
Apply
to complete the settings.
Related Operations
You can update the audio files of the camera on the local interface.
1. Prepare a USB device or other external storage device and plug it into the Device.
2. Click
Browse
.
3. Select the upgrade audio file (.bin or .wav).
4. Click
OK
to return to the Siren page.
5. Click
Upgrade
to upgrade the alarm audio file of the camera.
To Next Page
Loading...
