User's Manual
248
Figure 5-212 POS setting
Step 2 Configure the settings for the POS parameters.
Table 5-54 POS parameters
Parameter Description
POS Name
In the
POS Name
list, select the POS machine that you want to
configure settings for. Click to modify the POS name.
The POS name supports 21 Chinese characters or 63 English
characters.
Enable Enable the POS function.
Record Channel
Select the channel(s) that you want to record. The selected
channel(s) starts recording after an alarm occurs.
The recording for POS alarms and auto recording function must
be enabled. For details, see "5.1.4.9 Configuring Recorded Video
Storage Schedule" and "5.9.1 Enabling Record Control".
Privacy Enter the privacy content.
Protocol
Select
POS
by default. Different machine corresponds to
different protocol.
Connection Mode
In the
Connect Type
list, select the connection protocol type.
Click , the IP Address page is displayed.
In the
Source IP
box, enter the IP address (the machine that is
connected to the Device) that sends messages.
Character Encode Select a character encoding mode.
To Next Page
Loading...
Need help?
General
