User's Manual
300
Figure 5-277 Basic services
Step 2 Select
Basic Services
and configure parameters.
There might be safety risk when
Mobile Push Notifications
,
CGI
,
ONVIF
,
SSH
and
NTP
Server
is enabled.
Table 5-71 Basic services parameters
Parameter Description
Mobile Push Notifications
After enabling this function, the alarm triggered by the Device can
be pushed to a mobile phone. This function is enabled by default.
There might be safety risk if this service is enabled. Disable this
function when it is not in use.
CGI
If this function is enabled, the remote devices can be added through
the CGI protocol. This function is enabled by default.
There might be safety risk if this service is enabled. Disable this
function when it is not in use.
ONVIF
If this function is enabled, the remote devices can be added through
the ONVIF protocol. This function is enabled by default.
There might be safety risk if this service is enabled. Disable this
function when it is not in use.
To Next Page
Loading...
Need help?
General
