The response at the commanding terminal to this command is:
2.10.3 <BREAK>C -
Conversation Mode ON/OFF
This command is valid at the system console or the remote terminal. Conversation mode allows the remote
Operator to communicate directly with the local Operator. Data input at the local terminal appears at the remote
terminal, and any data input at the remote terminal appears at the local terminal. None of this information is
forwarded to the connected computer port. Any data transmitted by the computer is suspended until conversation
mode is terminated.
The command operates in toggle fashion. If conversation mode is OFF when this command is issued,
conversation mode will turn ON. If conversation mode is ON when the command is issued, conversation mode
will turn OFF.
The following events will also turn conversation mode OFF:
<BREAIC>E Command
<BREAK>N Command
<BREAK>U Command
(end remote session)
(enter NORMAL mode)
(enter USER mode)
If conversation mode is OFF when the <BREAK>C command is issued, the response at the commanding terminal
will be:
The response at the other terminal of the pair will be:
043-003621
2-12
DGC
CONFIDENTIAL - INTERNAL USE ONLY
To Next Page
Loading...