STEP 6 - DEVICE CONFIGURATION
PRODUCT REFERENCE GUIDE
21
11. Add your application specific codes to the Code Settings by selecting them from
the icons over the Configuration Parameters tree area. If the Data Matrix symbol-
ogy is not used, then delete it from the Code Settings with the Delete icon.
If you don’t know the code type, you can use the Code Autolearn feature by click-
ing on the Code Autolearn icon.
1
See the DL.CODE User’s Manual for details.
12. For each code symbology set the relative parameters according to your applica-
tion.
1. The Code Autolearn procedure will not recognize the following symbologies: Pharmacode, MSI,
Standard 2 of 5, Matrix 2 of 5.
To Next Page
Loading...
