INTRODUCTION
54
MATRIX 320
Time set to 250 μs, which allows a theoretical maximum application speed of 1320 mm/
s. When HDR is enabled, the Exposure Time can be reduced to 100 μs, which allows a
theoretical maximum application speed of 3300 mm/s.
For more details on line speed and exposure time calculations, refer to "
Maximum Line
Speed and Exposure Time Calculations" on page 121
.
To enable the HDR function on DL.CODE, go to Advanced Setup>Image Settings>Image
Quality>HDR Selector, then select HDR.
Figure 28 - Enabling HDR on DL.CODE
To Next Page
Loading...
