AUSTROMAT
®
664 iSiC
®
/ 674 baSiC
2
5. User interface
Operating Instructions (Version 03/2018) 63
Function Description See section
Data recording and transfer
[Printer] Specifies a printer for the firing furnace. 5.8.4.1
[Quality management] Option
Determines if a QM report is displayed after
a program.
5.8.4.2
[Diagnostic data] Shows the diagnostic data that is created
by the check program.
5.8.4.3
[Login data] Option
Defines the authorizations to use the firing
furnace via the web interface.
5.8.4.4
[Backup / Recovery] Backs up and restores the data in the firing
furnace control.
5.8.4.5
[FTP Server Login] Option
Defines the access to the firing furnace on
an FTP server.
5.8.4.6
Tab. 5-3 Functions in the "Setup" menu
To Next Page
Loading...