ARRHYTHMIA S ETUP
VF8 DELTA/DELTA XL/KAPPA 9-7
Modifying Arrhythmia Functions
1. Access the ARR setup table (see page 9-6).
2. Scroll to the parameter whose arrhythmia functions you wish to configure and
click.
3. Scroll to the function you wish to modify (the first column, Alarm, is
highlighted when you first click on a parameter).
4. Click to access settings of the selected arrhythmia function.
5. Dial through settings and click to confirm your selection.
6. Repeat steps 2 - 5 to configure additional arrhythmia functions or parameters.
1
Sets the rate and count
2
Stores or records events/alarms
3
Arrhythmia mode settings
4
Selects the arrhythmia mode
5
Accesses a second page
6
List of parameters
7
Initiates a manual relearn
8
Configures alarms
To Next Page
Loading...
