Dräger Infinity Delta User Manual

PRECAUTIONS
VF8 DELTA/DELTA XL/KAPPA 14-3
Precautions
The following precautions apply to IBP procedures. Refer to your hospital’s clinical
guidelines for further information. For general precautions regarding the use of
accessories and peripheral devices, see “Safety Considerations” on page 6 of these
Instructions for Use. For a complete list of Dräger provided IBP accessories available
with this product, see page C-19. Any use of non-approved transducers may
compromise the correct functioning of the device.
Hardware Setup
Tubing
For maximum signal strength, choose the shortest possible length of high-pressure
tubing for connection to the patient. Shorter tubing reduces signal attenuation and the
effects of motion artifacts. High-pressure tubing limits signal dampening. Follow your
hospital’s clinical procedures in assembling the tubing system. Be sure to remove all
bubbles from the system, as they dampen the signal and could lead to incorrect
systolic pressure measurements.
Transducers
Transducers are available in a variety of shapes and sizes. (For a complete list of
Dräger provided IBP accessories available with this product, see page C-19.) For
information on connecting the transducer to the monitor and pod or Y-cable (see page
14-6).
Zeroing
You can either zero a single transducer at a time or use the “Smart Zero” function to
zero all static transducers simultaneously.
WARNING: To prevent patient injury, never reuse a single-use
transducer.

Dräger Infinity Delta Specifications

General

Display Size	10.4 inch
Resolution	800 x 600 pixels
Battery Type	Lithium-ion
Parameters Monitored	ECG, SpO2, NIBP, Invasive Blood Pressure, Temperature, CO2, Cardiac Output
ECG	Yes
SpO2	Yes
NIBP	Yes
Invasive Blood Pressure	Yes
Temperature	Yes
CO2	Yes
Cardiac Output	Yes
Power Supply	100 to 240 V AC, 50/60 Hz
Connectivity	WLAN
Operating Temperature	0 to 40 °C
Storage Temperature	-20 to 60 °C
Humidity	15 to 95 % relative humidity, non-condensing
Alarms	Audible and visual alarms