Dräger Infinity Delta - Connecting;Disconnecting the Kappa To;From the Network; Disconnecting the Delta;Delta XL from the Network; Network Message (Delta;Delta Xl;Kappa)

3-4 DELTA/DELTA XL/KAPPA VF8
3 N
ETWORK APPLICATIONS
Disconnecting the Delta/Delta XL from the Network
Disconnecting the monitor from the network
1. Hold the monitor firmly by its handle. Slide the lever to the left to disengage
the power supply. The monitor automatically switches to battery power.
2. Continue to move the lever to the left until it clicks. Use both hands to tilt the
monitor forward and lift it off the IDS or Docking Station.
Connecting/disconnecting the Kappa to/from the Network
 Plug the network cable into the Infinity network connector (X14) on the rear
panel of the monitor (see page 1-3).
 Unplug the network cable to disconnect the Kappa monitor from the network.
Network Message (Delta/Delta XL/Kappa)
Once the monitor is connected to the network, the following message may appear.
Message Condition Display Area
Not monitored by
central
Connected to network, but not assigned
to an Infinity CentralStation
Network