Dräger Infinity Delta User Manual

4DELTA/DELTA XL/KAPPA VF8
I
NFINITY DELTA SERIES USER’S GUIDE
Intended Use
The Infinity Delta Series (Delta/Delta XL/Kappa) Monitors are intended for multi-
parameter patient monitoring. The devices will produce visual and audible alarms if
any of the physiological parameters monitored vary beyond preset limits and timed or
alarm recordings will be produced. This device will connect to an R50 recorder, either
directly or via the Infinity Network.
Indications for Use
The Infinity Delta series monitors are capable of monitoring:
 Heart rate
 Respiration rate
 Invasive pressure
 Non-invasive pressure
 Arrhythmia
 Temperature
 Cardiac output
 Arterial oxygen saturation
 Pulse rate
 Apnea
 ST segment analysis
 12-lead ST segment analysis
 tcpO2/tcpCO2
 EEG signals
 FiO
2
 etCO
2
 Respiratory mechanics
 Anesthetic agents
 Neuromuscular transmission
NOTE: All Dräger hardware and screen shots shown in these Instructions for Use are
examples only. Actual product or screens may differ slightly.

Dräger Infinity Delta Specifications

General

Display Size	10.4 inch
Resolution	800 x 600 pixels
Battery Type	Lithium-ion
Parameters Monitored	ECG, SpO2, NIBP, Invasive Blood Pressure, Temperature, CO2, Cardiac Output
ECG	Yes
SpO2	Yes
NIBP	Yes
Invasive Blood Pressure	Yes
Temperature	Yes
CO2	Yes
Cardiac Output	Yes
Power Supply	100 to 240 V AC, 50/60 Hz
Connectivity	WLAN
Operating Temperature	0 to 40 °C
Storage Temperature	-20 to 60 °C
Humidity	15 to 95 % relative humidity, non-condensing
Alarms	Audible and visual alarms