Dräger Infinity Delta User Manual

8DELTA/DELTA XL/KAPPA VF8
I
NFINITY DELTA SERIES USER’S GUIDE
Inspection and Maintenance
Regular inspection and maintenance of the monitoring system, its accessories and
its mounts are essential for maintaining patient safety. Failure by the responsible
individual, hospital or institution to follow the Service instructions may compromise
patient or caregiver safety and/or lead to device failure.
CAUTION: To avoid short-circuiting and otherwise damaging the device, do not allow
fluids to come in contact with the device. If fluids are accidentally spilled on the
equipment, remove the affected unit from service as soon as possible and contact the
technical personnel to verify that patient safety is not compromised.
CAUTION: Before moving the patient, disconnect the patient from all sensors that will
not be used (to avoid patient injury).
CAUTION: Read all cleaning instructions (for example, originating from the
disinfectant manufacturer and the hospital) carefully before cleaning the device. Refer
to the “Cleaning and Disinfecting” chapter for device-specific cleaning instructions.
Moisture may damage the circuits, compromise critical performance and/or present a
safety risk.
WARNING: If the monitor is mechanically damaged, or if it is
not working properly, do not use it. Contact your technical
personnel.

Dräger Infinity Delta Specifications

General

Display Size	10.4 inch
Resolution	800 x 600 pixels
Battery Type	Lithium-ion
Parameters Monitored	ECG, SpO2, NIBP, Invasive Blood Pressure, Temperature, CO2, Cardiac Output
ECG	Yes
SpO2	Yes
NIBP	Yes
Invasive Blood Pressure	Yes
Temperature	Yes
CO2	Yes
Cardiac Output	Yes
Power Supply	100 to 240 V AC, 50/60 Hz
Connectivity	WLAN
Operating Temperature	0 to 40 °C
Storage Temperature	-20 to 60 °C
Humidity	15 to 95 % relative humidity, non-condensing
Alarms	Audible and visual alarms