OVERVIEW
VF8 DELTA/DELTA XL/KAPPA 19-3
Ports and outlets are clearly marked on the front of the etCO
2
module and pods. Use
these labels as a guide when connecting the pod or module to the monitor and
peripherals..
Plug one end of connector cable into
PodCom connector on left side of
monitor. Plug the other end into the pod.
1
Sidestream input port
2
Sidestream output port
3
Capnostat sensor cable
4
PodComm connection (to
monitor)
Slide into slot on rear of monitor until
the module rests securely.
1
Sidestream output port
2
Sidestream input port
3
Capnostat sensor cable
To Next Page
Loading...
