Dräger Infinity Delta User Manual

15-4 DELTA/DELTA XL/KAPPA VF8
15 C
ARDIAC OUTPUT (C.O.)
Main Screen Display
When Cardiac Output (C.O.) measurements are available, the most recently saved
C.O. average appears in the upper right of the C.O. parameter box on the main screen.
— Cardiac Output (C.O.) — Average of the last series of measurements saved
in liters per minute (L/min).
— Blood temperature (BT) — Patient’s blood temperature acquired from the
Hemo2 or Hemo4 pod currently used to measure C.O.
— Time of the C.O. Average — Time the currently displayed C.O. average was
taken.
— Injectate temperature (IT) — Temperature of the injectate solution acquired
from the hemodynamic pod being used for C.O. measurements.
The following diagram shows a typical C.O. parameter box.
NOTE: If no new measurements have been taken for 24 hours, the C.O. average and
time stamp are blanked.
)
1
Last saved C.O.
average
2
Blood temperature
(reading and alarm
3
Injectate temperature
4
Time of last saved C.O.
average

Dräger Infinity Delta Specifications

General

Display Size	10.4 inch
Resolution	800 x 600 pixels
Battery Type	Lithium-ion
Parameters Monitored	ECG, SpO2, NIBP, Invasive Blood Pressure, Temperature, CO2, Cardiac Output
ECG	Yes
SpO2	Yes
NIBP	Yes
Invasive Blood Pressure	Yes
Temperature	Yes
CO2	Yes
Cardiac Output	Yes
Power Supply	100 to 240 V AC, 50/60 Hz
Connectivity	WLAN
Operating Temperature	0 to 40 °C
Storage Temperature	-20 to 60 °C
Humidity	15 to 95 % relative humidity, non-condensing
Alarms	Audible and visual alarms