Dräger Infinity Delta - Getting Started; Accessing the Main Screen

1-20 DELTA/DELTA XL/KAPPA VF8
1 I
NTRODUCTION
Getting Started
To turn the monitor on
 Press the power key (
O
), located on the bottom left of the Delta or Delta XL
monitor's front panel and on the top left of the Kappa monitor’s front panel.
The monitor turns on the power indicator light, lights the alarm bar, emits a
power-on tone, lights up the screen, performs a self-test, and displays the
main screen.
To turn the monitor off
 Press and hold the power key (O) for two seconds. The power indicator light
turns dark, and the monitor emits a power-down tone.
Accessing the Main Screen
After you power up the monitor, the main screen appears. To return to the main screen
from a menu or other display:
 Press the Main Screen fixed key, located just above the rotary knob on the
front panel of the monitor. The main screen appears, as shown in the
following illustration.
The standard Delta monitor provides five waveforms with adjacent parameter boxes.
Kappa provides four waveforms with adjacent parameter boxes. Delta XL provides
six waveforms with adjacent parameter boxes. Channels can be added to display up to
eight waveforms. The bottom channel can be used to display additional parameter
boxes (see “Bottom Channel” on page 2-6).
1
Network message
2
Parameter boxes
3
Waveforms
4
Local message