PHYSIOLOGICAL CALCULATIONS (HEMO/OXY/VENT CALCULATIONS)
VF8 DELTA/DELTA XL/KAPPA 16-5
If a value is missing or suspect (for example, artifact), you can enter or modify its
values as follows:
1. Highlight the parameter in question and click. A data entry keypad appears:
2. Click on the digits of the new value.
3. Click on
Accept when you are done. The modified value immediately
appears on the Calculations screen, marked with a pound sign (
#). Modified
values are not written to Main Screen parameter boxes and waveforms, nor
are they trended.
Hemodynamic Parameters
The monitor calculates the hemodynamic values using these parameters:
Label
Parameter Value Description Derivation Units
ART S Systolic Arterial Pressure Monitored input mmHg
kPa
ART M Mean Arterial Pressure Monitored input mmHg
kPa
ART D Diastolic Arterial Pressure Monitored input mmHg
kPa
CO, CCO,
ICO.
Cardiac Output (continuous, intermittent) Monitored input L/min
p-CO Thermodilution Cardiac Output via the
PiCCO pod
Monitored input L/min
PCCO Pulse Contour Cardiac Output via the
PiCCO pod
Monitored input L/min
CVP Central Venous Pressure Monitored input mmHg
kPa
HR Heart Rate Monitored input bpm
HT Patient’s height (length) Manual entry cm / in
PA M Mean Pulmonary Artery Pressure Monitored input mmHg
kPa
PWP Pulmonary Capillary Wedge Pressure Monitored input mmHg
kPa
WT Patient‘s current weight Manual entry kg / lb
To Next Page
Loading...
