Dräger Infinity Delta - Second and Third Channel Label; Time Base

12-16 DELTA/DELTA XL/KAPPA VF8
12 R
ESPIRATION
Second and Third Channel Label
You can set the second and/or third channel of the OCRG menu as follows:
1. Click the
Setup button on the OCRG screen.
2. Click
Parameter 2 and select SpO2, tpO2, or tpO2*.
or
3. Click on
Parameter 3 and select RESP or etCO2.
Time Base
You can select either a three minute or a six minute OCRG time base. The default time
base is three minutes.
To change the OCRG time base to six minutes
1. Click the Setup button on the OCRG screen.
2. Click
Time Base.
3. Click on
6 min.
4. Enter clinical password.
NOTE:
 The clinical password menu does not time out. It remains displayed until you
click on
Accept.
 After the clinical password is entered, the new OCRG time base takes effect
and is displayed on the lower left of the OCRG menu.