SETUPS M ANAGEMENT
VF8 DELTA/DELTA XL/KAPPA 2-9
Setups Management
You can save and restore the current patient and monitoring settings. When you
discharge a patient, the monitor automatically saves the default settings, while both
default and user-defined settings are saved on the local IDS.
Setups Management
Menu function/item Description Reference/Procedures
Configuring Setups
To name, save, or restore setups, configure them as shown in the referenced pages.
Main screen display Main Screen menu Page 2-5
Parameters Parameter setup menu(s)
NOTE: For more information,
see parameter chapters.
Page 2-5
Alarms Alarm Limits Table Page 5-6
Arrhythmia calls Arrhythmia Setup Table Page 9-6
Trends Trend setup
Trend graphs
Trend table
Page 6-2
Page 6-3
Page 6-6
Naming and Renaming Setups
Follow these procedures to name or rename the setups you have configured.
Accessing
the Unit Manager
Menu
Allows you to label (name) or
modify setups on the
password-protected Unit
Manager menu.
NOTE: For information on
other Unit Manager
functions, see page 2-14.
To enter the password:
1) Press the Menu fixed key to display the
Main menu.
2) Click on Monitor Setup.
3) Click on Unit Manager. A data entry box
appears.
4) Click on each number of the appropriate
password. If you make a mistake, click on
Backspace and try again.
5) Click on Accept to open the Unit Manager
menu.
Rename Setups The selected setups on the
Rename Setups menu are
listed automatically on the
Save/Restore Setups menu.
NOTE: All setups on the
Rename Setups menu
except the default setup are
ghosted if the monitor is not
connected to a IDS.
1) Open Unit Manager.
2) Click on Rename Setups.
3) Select Default or a numbered setup.
4) Name a setup using the rotary knob and
the edit keys at the bottom of the display.
5) Click on Accept to replace the numbered
or default setup with the name of your
choice.
To Next Page
Loading...
