POWER SOURCES (DELTA/DELTA XL)
VF8 DELTA/DELTA XL/KAPPA 1-15
Infinity Docking Station (IDS)
The Infinity Docking Station (IDS) helps facilitate patient transport, allowing you to
remove the monitor from the bedside and dock it at another station while maintaining
patient and monitor connections. This feature, called Pick and Go, is explained in
further detail on page 3-5. With its companion DC power supply, the IDS provides
power and data connection, stores setup defaults, and connects your monitor to a
network.
Battery Power
The Delta/Delta XL monitor operates on an external, sealed lead-acid battery and an
internal lithium ion battery. The external battery, which can easily be replaced when
depleted, can power the monitor for approximately 50 minutes. If it runs low or you
remove it from a monitor that has been using battery power, the monitor automatically
switches to an internal battery, which can power the monitor for approximately 180
minutes (see page B-8).
NOTE: The SC7000/9000XL monitor's internal lead-acid battery can power the
monitor for approximately 75 minutes.
1 MultiGas module
2 Power supply
3 Export protocol/alarm output
(nurse call)
1
, Scio module,
(X3)
4 Independent Surgical Display
(ISD) (X4)
5 Network
6 R50 series recorder (X13)
7 Video out / Remote display
(X5)
8 Potential equalization
9 MIB connectors
Infinity Docking Station
(Rear View)
1
NOTE: Alarm output (nurse call) requires the
alarm output cable with partnumber 5194928
To Next Page
Loading...
