NBP SETUP
VF8 DELTA/DELTA XL/KAPPA 13-7
To connect the Hose:
Push the hose end fitted with the plastic collar firmly into the connector on the
left side of the monitor (see figure below).
Connecting the Cuff
1. Grasp the hose at the cuff connection and insert it into the mating hose
connector until it clicks into place.
2. To remove the cuff, retract the metal collar on the NBP adapter hose.
NOTE: There are separate hoses for pediatric/adult and neonatal patient categories.
Select the appropriate hose based on intended monitoring application.
NBP hose connector
Kappa
Delta/Delta XL
NBP hose connector
To Next Page
Loading...
