DISPLAY F EATURES
VF8 DELTA/DELTA XL/KAPPA 21-13
To configure the parameter display
1. Click on the parameter box labeled Paw or Vent.
2. Click on
Respiratory Mechanics.
3. Click on
View at the bottom of the screen.
4. Scroll through the available settings (
Intermittent Vent, Controlled Vent,
Assisted Vent
) and click to select a ventilation mode.
Screen Configurations – Neonatal
The following illustrations show the Respiratory Mechanics screen variously
configured according to flow sensor type (neonatal, pediatric, or adult) and
View
setting (intermittent, controlled, or assisted). For parameter definitions, units of
measure, and derivations, see the table on page 21-16.
To Next Page
Loading...
