PICCO PARAMETER SETUP
VF8 DELTA/DELTA XL/KAPPA 26-17
To access the transpulmonary thermodilution setup menu for the
PiCCO pod:
Click on the p-CO parameter box on the main screen;
or
1. Press the
Menu fixed key to display the Main menu.
2. Click on
Patient Setup.
3. Click on
Parameters.
4. Click on
PiCCO-TD.
5. Click on
Parameter 1
6. Scroll to the PiCCO transpulmonary thermodilution parameter you want to
assign as Parameter 1 (p-CO, p-CI, GEDV, GEDVI, EVLW, EVLWI, GEF,
PVPI, CFI, ITBV, or ITBVI)(p-CO, p-CI, GEDV, GEDVI, EVLW, EVLWI,
CFI, ITBV, or ITBVI) and click.
7. Repeat the previous two steps for
Parameter 2 and Parameter 3.
To Next Page
Loading...
