INDEPENDENT SURGICAL DISPLAY (ISD)
VF8 DELTA/DELTA XL/KAPPA 28-21
Quick Reference Table – ISD Setup Menu
Menu
Selection
Description Settings
Review Governs display of trend graphs on
ISD screen.
• Click on Remove Trend to clear current
trend graphs from Surgical Display
screen.
• Click on 10 Min Trends to Configures
graphs to monitor trends in 10 minute
intervals.
• Click on 60 Min Trends to configure
graphs to monitor trends in one-hour
intervals.
• Click on Exit to return to ISD Main
menu.
The Surgical Display - Main Screen Submenu
This submenu allows you to configure the following functions.
Param Color
Mode
Allows user to choose parameter
colors from the monitor or to set
different parameter colors for the ISD.
• Click on Monitor (default) to display the
parameter colors as they are received
from the monitor.
• Click on Manual to select parameter
colors that are different from the monitor
settings. (See page 2-23 for information
on Parameter Color selection.)
Display Mode Determines whether the ISD Main
Screen displays unconnected as well
as connected parameters
• Click on Manual to display the
parameters in the order you have
determined, regardless of whether or not
they are connected.
• Click on Auto to display only connected
parameters, which appear in the order
selected on the Surgical Display’s
parameter priority table.
• Click on Monitor to display parameters
exactly as they are configured on the
bedside monitor screen.
Parameter
Priority
Displays all ISD parameters in their
current order of priority and allows
you to change the sequence
Set the ISD Parameter Priority using the
procedures described in chapter 2,
Monitor Setup (page 2-5).
Max.
Channels
Sets the maximum number of
waveform channels displayed on
Surgical Display screen
Click on one of the following settings:
• 4, 5, 6, 7, or 8.
ECG Channel Determines the number and format of
ECG waveforms displayed on ISD
screen
Click on one of the following settings:
•ECG1
• ECG 1 & 2
• ECG 1 & 2 & 3
Bottom
Channel
Configures bottom channel of ISD
screen to show waveform or
parameter boxes
Click on one of the following settings:
• Parameters
• Waveform
To Next Page
Loading...
