SETUPS M ANAGEMENT
VF8 DELTA/DELTA XL/KAPPA 2-11
Restoring Factory Defaults
Consult your hospital’s technical personnel to restore settings shipped with the monitor to their
original configuration. For detailed information on password-protected Biomed setup functions,
please consult Service and installation documentation.
Managing Setups during Pick And Go (Delta & Delta XL only)
Follow these procedures to specify how the monitor downloads default configurations
from the local Docking Station during P
ICK AND GO operations.
Pick And Go NOTE: Configure Pick and
Go on the Save/Restore
menu before you transport
the patient (see page 2-12).
1) Open the Unit Manager menu (see page
2-9).
2) Click on Save/Restore.
3) Click on Pick And Go.
4) Click on one of the following settings to
execute the indicated function:
• Automatic — When the monitor docks, it
automatically downloads the default
configuration stored in the local Docking
Station. If this will remove existing
parameters from the display, a pop-up
menu asks you to confirm this action.
• Manual — When the monitor docks, a pop-
up menu always asks you to confirm the
downloading of the local default
configuration, whether or not this will
remove existing parameters from the
display.
• OFF — When the monitor docks, it does
not download the local configuration but
continues to operate with the existing
settings.
Setups Management
Menu function/item Description Reference/Procedures
To Next Page
Loading...
