187
Save/Load a Notebook
To Save a Notebook
1. Make sure your USB Flash Drive or other removable media is plugged into your
communication aid.
2. Open the NOTEBOOK MENU in the Toolbox.
3. Open the Notebook you want to save, then return to the NOTEBOOK MENU.
4. Select Save a Notebook to Disk.
5. Your Notebooks are listed. Select the Notebook you want to save.
6. The Notebook is loaded onto your flash drive as a .txt file.
7. Activate OK to exit.
Load a Notebook
You must have a saved Notebook on your USB flash drive.
1. Make sure your USB Flash Drive is plugged into your communication aid.
2. Open the NOTEBOOK MENU in the Toolbox.
3. Select Load a Notebook from Disk.
4. Your saved Notebooks are listed.
5. Select the Notebook you want to load.
6. The Notebook is loaded. Activate OK to exit.
To Next Page
Loading...