Eco 14 - Swap Core Vocabulary Keys on Your Overlay

USING THE CORE VOCABULARY OVERLAY
ECO Manual
109
Swap Core Vocabulary Keys on Your Overlay
You can move keys around in the Core area of your communication overlay by using SWAP
CORE KEYS. When you swap keys, the whole key, including any sequences that might be
stored under it, is swapped.
To Swap Two Keys:
1. Go to the Toolbox
and open the SWAP CORE KEYS menu.
2. Activate the first key you want to swap.
3. Now activate the key you want to swap with.
4. You can continue to swap keys. To exit and save your work, activate the Text Display
area.
Note: If you want to exit Swap Keys before you have completed an operation, activate the
Text Display Area. This is the same as using a CANCEL key.