INTERNAL COMPUTER
Eco Manual
246
How to Store the IR Functions under an Icon Sequence
If you don't want to add TV BDRM to your
REMOTES activity, you can always store it under
an icon sequence on your communication overlay.
To Store TV BDRM (or any remote control device and its functions) under an Icon
Sequence:
1. Go to the Toolbox and select
STORE CORE.
2. Choose the icon sequence you want to store the command under.
3. Activate
OK.
4. Choose
Spell Text for Message.
5. Select
INSERT TOOL. Activate More Items until you see IR, then select it. Select TV
BDRM, select Power, select OK. Modify the last picture and change the label if you want.
6. Select
OK when you are finished.
7. Repeat these steps until all the TV BDRM functions are stored under icon sequences.
No matter where you decide to store remote control functions, the formula you will use is
always:
INSERT TOOL, IR, DEVICE NAME, FUNCTION NAME
Remember to save your device memory after you store remote control signals.
To Next Page
Loading...