USING THE CORE VOCABULARY OVERLAY
ECO Manual
99
Erase a Recorded Message
You can erase messages that have been recorded in Activities and Pages and you can erase
messages that have been recorded and stored under icon sequences.
To erase a recorded message you simply record over the old message.
To Erase a Recorded Message in an Activity
To erase a message on a PAGE, just select the Page you want in step one.
We will erase the recording you just made in the ME Activity.
1. If the NAME key is still visible in your Activity Row, select the SET-UP key on
the front of your case, then select the NAME key. If it is not visible, select the ME Activity,
then select the SET-UP key then select the NAME key.
2. Make sure the Type of Message option is set to Recorded Speech. Select the
Record Message key.
3. Record a new name. This will erase the old name and replace it with the new name.
3. Listen to your recording and select OK when you are satisfied.
To Erase a Recorded Message stored under an Icon Sequence
1. Activate the
TOOLS key to go to the Toolbox.
2. Select ERASE CORE.
3. Select the icon sequence of the message you want to erase.
4. Select OK. You see the warning box below:
To Next Page
Loading...