SETTING UP YOUR DEVICE
ECO Manual
58
Activation Delay
This gives you a few seconds to change your mind when you have selected a key. This is
automatically set to your Scanning Speed. For example, let's say your scanning speed is set to
one second (1.0). You scan to and select a key, then realize it's not the key you want. You have
one second to activate your switch again to "de-select" the key and then scan to a new key.
Number of Rescans
Select the amount of times you want to scan the overlay.
Tracker Headpointing Options
Magnify Windows Clicks
Magnification Factor
Magnification Area
Magnification works when your ECO is in a Windows application.
When Magnify Window Clicks is ON you can select an area in your Windows application and
it will appear in a magnified box. This makes it easier for you to select the options you want in
your application.
Magnification Factor: how large do you want the area magnified—2 times larger (2X) 4 times
larger (4X)?
The Magnification Area (in number of pixels) is the size of the area you are magnifying.
We recommend that you select different numbers for Factor and Area and try them out in an
application on your ECO. You'll then have a good idea of what works for you.
For more information see The Magnification Option beginning on page
262.
Acceptance Time
This is the amount of time it takes from when you point to a key until the device beeps and
accepts the selection.
Horizontal Adjustment
Vertical Adjustment
If you are having trouble reaching the right or left edges, increase the "Horizontal" adjustment
number. If you had trouble reaching the top or bottom edges increase the "Vertical"
adjustment number.
To Next Page
Loading...