SETTING UP YOUR DEVICE
ECO Manual
57
Auto Scan
Nudge your joystick. The device will automatically scan the overlay beginning in the direction
you moved the joystick.
Hold
You must hold your switch to scan the overlay. Release it to stop the scan.
Scanning Speed
This is the amount of time it takes for your device to move from one key, row, or column to the
next in a scan. The default scanning speed is one second. This means it takes one second from
the time one key is highlighted until the next key is highlighted.
Acceptance Time
The amount of time you must maintain contact with your switch before the key you have
scanned to is accepted. The device beeps when your key is accepted. For example, if you set
acceptance time for .50 seconds, you must activate and hold your switch for ½ second before the
key will be selected and the device beeps.
Release Time
This tells your device how long to wait after you release your switch before you can make
another activation with the same key or switch. For example, if you set the Release Time for 1
second, you must wait one second after you release your switch before you can continue to scan
or activate your switch. If you release your switch and then accidentally activate it again before
the release time has passed, your device will not make any activations.
Auto Repeat
This lets you choose how fast a key will repeat when you hold it down.
Selection Type
Manual means you must activate your switch to make a selection. With a joystick, you may
need to have a third switch plugged into the Y-adapter in order to make a selection.
Auto means your joystick and the device will automatically make selections you want.
Predictive Selection: This works hand-in-hand with Icon Prediction. (Icon Prediction is in the
FEEDBACK MENU and the default is ON.) When you turn Predictive Selection On, your
device highlights only those icons where messages are stored. These highlighted icons are the
only keys on the keyboard that will produce a response. Your scan will go only to the highlighted
keys. Note: Icon Prediction will work whether Predictive Selection is On or not.
To Next Page
Loading...