ACTIVITIES
ECO Manual
122
Modify an Already Existing Activity
To modify an Activity you can open the MODIFY ACTIVITY menu in the Toolbox.
You can also use the SET-UP key
on the front of the case.
If you select the SET-UP key first and then select an Activity, you will go to the first screen of
the MODIFY ACTIVITY MENU.
If you select an Activity first and then select the SET-UP key, you will go to the Modify Item
Within an Activity screen.
To Modify an Activity:
1. Go to the Toolbox and activate the MODIFY ACTIVITY menu or use the SET-UP key (see
above).
2. You see the Activity Row. Select the Activity you want to modify. (Activate the Activity
key
to see more Activities.)
3. You can change the icon, label or key color of the main Activity key. You can change its
position in the Activity Row or shuffle the position of all the Activities. You can hide the
Activity or let it show in the Activity Row. You can change the background color of the
Activity. You can copy the Activity to a different Area. You can also delete the entire
Activity. Turn Picture Prediction On or Off here.
4. If you want to change one of the items within the Activity, select Modify Item Within the
Activity.
4a. Some options within the Activity:
Change Icon: Choose a new icon from the icon categories.
Change Label: A label can contain up to 9 letters. If you want a blank label, type a space
instead of a word.
Store Category Prompt: This works with scanning only. Store a prompt for your device to
speak that identifies the Activity.
To Next Page
Loading...