MP3 PLAYER MENU
Eco Manual
231
Select Playlist to Play
Select Folder to Play
Select File(s) to Play
These options allow you to search for and select any songs you have saved on removable media
(USB or flash card drives) you have plugged into the ECO or on the ECO's hard drive.
Creating and Using Playlists
To create a playlist, any music must be turned off (Stop).
1. If you have songs you want to use on a USB or flash card, plug them into the ECO.
2. Go to the Toolbox and open the
MP3 PLAYER MENU.
3. Select the
Playlist option.
4. Select
Create New Playlist. If there are no playlists yet, the screen remains the same.
5. Select
Add MP3.
6. You see the
File Browser. At the top of the screen you see what storage device you are using
and what kinds of sound files are on it. If the files you want are showing, select the ones you
want. There may be more than one screen of songs to look at. Make sure the box is checked
on each file you select. If you want all the songs, select the
Select All key at the bottom of
the screen. If you have songs in other folders, select the
Up Folder option.
7. When you have finished, activate
OK. You see your playlist.
You may see a message box telling you that a certain song may not play and asking if you
want this to be fixed. If you respond
YES, your device will make sure the song is playable on
your communication aid. This generally involves shortening the information about the song
that is included in the song's "tag". The song itself is not changed in any way. If you reply
NO to the message, the song may play as it is or it may not.
8. Use the
Up and Down Arrows to highlight a song on the playlist. Use the Move Up and
Move Down keys to re-order the placement of the highlighted song in the list. Use Remove
To Next Page
Loading...