SETTING UP YOUR DEVICE
ECO Manual
52
Bluetooth Switch
See pages 16 and 18- 25 (1 and 2-switch) in the Bluetooth Switch mini-manual for complete
information. Once you have your access method options selected, set the Bluetooth switch to the
default Switch Mode; plug in an extra switch if you need one; select Bluetooth Switch in the
ACCESS METHOD MENU. Press the PAIR button on the Bluetooth Switch, then select the
Pair with Switch Button on your device screen. You will see a box on your device screen
telling you when the pairing is complete and the device and switch are connected.
2 Switch Scanning Methods
Plug two single switches or a dual switch into either the SWITCH A and/or SWITCH B
connectors on the left side of your device.
Auto Scan Directed
Your device automatically scans the keyboard. Change directions by activating your switch.
Hold Scan Directed
You must press and hold your switch to scan the keyboard. Change directions by releasing and
then pressing and holding your switch.
Note: At this time directed scans will not allow you to scan the Word Prediction list.
Step Scan
You must activate your switch each time you want to move to a new position on the keyboard.
Linear Scan
This allows you to step through the keys on your overlay moving from left to right across the
rows or from top to bottom down each column. You must activate your switch to move the scan.
Row/Column
The scan highlights each row of keys beginning with the top row and moving down the screen.
When the row that contains the key you want is highlighted, activate your switch. The scan will
highlight the separate columns in the row you selected, moving from left to right across the
screen. When the key you want is highlighted, activate your switch. The device beeps when your
key is accepted.
To Next Page
Loading...