APPENDIX C: SERIAL MACRO TOOL
Eco Manual
281
Appendix C: Serial Macro Tool
The most common computer control commands have been added to your device as insertable
tools so you no longer have to type a whole string of characters to generate the command. You
can just insert the correct tool for the command.
When you use any storing procedure, you can use the
SERIAL MACRO
button after using the
INSERT TOOL key. SERIAL MACRO opens up
a page with a list of all the computer control commands.
For example, if you select the
ALT key, you will see the following:
This command also includes the PROMPT MARKER. Depending on what you are trying to
achieve, you may want to delete the
SERIAL ON command. However, it is much easier to
delete one or two elements than to type in the whole string.
If you do not see the command you want, you will have to create it yourself. All the
keyboard commands for IBM and Mac computers are listed in Appendix K beginning on page
327.
To Next Page
Loading...